PC WARE INTERNATIONAL, INC.

SUPER I/O

  Data bus:                  16-bit, ISA

  Size:                      Half-length, half-height card

  Hard drive supported:      Two IDE (AT) Interface drives

  Floppy drives supported:   360KB, 720KB, 1.2MB, 1.44MB

[Image]

                               CONNECTIONS

                    Function                             Location

  40-pin AT Interface (IDE) connector                      CN1

  34-pin control cable connector - floppy drive            CN2

  Game port                                                CN3

  10-pin serial port 1 (COM1/COM3)                         CN4

  10-pin serial port 2 (COM2/COM4)                         CN5

  25-pin parallel port                                     CN6

  HDD LED connector                                         J2

                        USER CONFIGURABLE SETTINGS

               Function                     Location          Setting

  »   IDE I/O channel ready enabled            J1            pins 1 & 2
                                                               closed

      IDE I/O channel ready disabled           J1               Open

  »   Game port (CN3) enabled                  JP3           pins 1 & 2
                                                               closed

      Game port (CN3) disabled                 JP3           pins 2 & 3
                                                               closed

  »   Floppy drive (CN2) enabled               JP7           pins 1 & 2
                                                               closed

      Floppy drive (CN2) disabled              JP7           pins 2 & 3
                                                               closed

  »   HDC exists                               JP8           pins 1 & 2
                                                               closed

      HDC does not exist                       JP8           pins 2 & 3
                                                               closed

                        USER CONFIGURABLE SETTINGS

               Function                     Location          Setting

  »   IDE (CN1) enabled                        JP9           pins 1 & 2
                                                               closed

      IDE (CN1) disabled                       JP9           pins 2 & 3
                                                               closed

                     SERIAL PORT 1 (CN4) CONFIGURATION

          Function                    JP4                    JP6

  »           COM1             pins 1 & 2 closed      pins 1 & 2 closed

              COM3             pins 2 & 3 closed      pins 1 & 2 closed

            Disabled                  N/A             pins 2 & 3 closed

                     SERIAL PORT 2 (CN5) CONFIGURATION

          Function                    JP1                    JP2

  »           COM2             pins 1 & 2 closed      pins 1 & 2 closed

              COM4             pins 2 & 3 closed      pins 1 & 2 closed

            Disabled                  N/A             pins 2 & 3 closed

                     PARALLEL PORT (CN6) CONFIGURATION

          Function                    JP5                    JP10

  »           LPT2             pins 1 & 2 closed      pins 1 & 2 closed

              LPT3             pins 2 & 3 closed      pins 1 & 2 closed

            Disabled                  N/A             pins 2 & 3 closed