PINE TECHNOLOGY PT-626 Data bus: 32-bit, VL-Bus Size: Three quarter-length, full-height card Hard drive supported: Two IDE (AT) interface drives Floppy drives 360KB, 720KB, 1.2MB, 1.44MB supported: [Image] CONNECTIONS Function Location 40-pin IDE (AT) interface connector CN1 34-pin control cable connector - floppy drive CN2 15-pin game port - internal CN3 9-pin serial port 1 (COM1/3) CN4 9-pin serial port 2 (COM2/4) CN5 25-pin parallel port CN6 External IDE (AT) interface LED connector JP6 USER CONFIGURABLE SETTINGS Function Location Setting » IDE interface enabled JP7 pins 1 & 2 closed IDE interface disabled JP7 pins 2 & 3 closed » Parallel port enabled JP11 pins 1 & 2 closed Parallel port disabled JP11 pins 2 & 3 closed » Hard drive is installed in JP12 pins 2 & 3 closed system Hard drive is not installed JP12 pins 1 & 2 closed in system USER CONFIGURABLE SETTINGS(CONTINUED) Function Location Setting » Serial port 1 enabled JP13 pins 1 & 2 closed Serial port 1 disabled JP13 pins 2 & 3 closed » Serial port 1 address 3F8h JP14 pins 1 & 2 closed select Serial port 1 address 3E8h JP14 pins 2 & 3 closed select » Serial port 2 enabled JP15 pins 1 & 2 closed Serial port 2 disabled JP15 pins 2 & 3 closed » Floppy drive interface JP16 pins 1 & 2 closed enabled Floppy drive interface JP16 pins 2 & 3 closed disabled » Parallel port address 378h JP17 pins 1 & 2 closed select Parallel port address 278h JP17 pins 2 & 3 closed select » Serial port 2 address 2F8h JP18 pins 1 & 2 closed select Serial port 2 address 2E8h JP18 pins 2 & 3 closed select » Game port enabled JP19 pins 1 & 2 closed Game port disabled JP19 pins 2 & 3 closed ACTIVE/RECOVERY TIMES FOR 33MHZ SYSTEMS Active Recov. JP3 JP4 JP5 JP8 JP9 JP10 5T 5T pins 2 pins 1 pins 2 pins 2 pins 2 pins 2 & 3 & 2 & 3 & 3 & 3 & 3 5T 7T pins 2 pins 1 pins 2 pins 1 pins 2 pins 2 & 3 & 2 & 3 & 2 & 3 & 3 5T 9T pins 2 pins 1 pins 2 pins 2 pins 1 pins 2 & 3 & 2 & 3 & 3 & 2 & 3 Note: All pins designated should be placed in the closed position. ACTIVE/RECOVERY TIMES FOR 50MHZ SYSTEMS Active Recov. JP3 JP4 JP5 JP8 JP9 JP10 9T 9T pins 2 pins 1 pins 1 pins 2 pins 1 pins 2 & 3 & 2 & 2 & 3 & 2 & 3 9T 11T pins 2 pins 1 pins 1 pins 1 pins 1 pins 2 & 3 & 2 & 2 & 2 & 2 & 3 9T 13T pins 2 pins 1 pins 1 pins 2 pins 2 pins 1 & 3 & 2 & 2 & 3 & 3 & 2 Note: All pins designated should be placed in the closed position.