UNIDENTIFIED

SUPER IDE MODEL 827 VER. 11

  Data bus:                  16-bit, ISA

  Size:                      Half-length, full-height card

  Hard drive supported:      Two IDE (AT) Interface drives

  Floppy drives supported:   Two 360KB, 720KB, 1.2MB, or 1.44MB drives

[Image]

                              CONNECTIONS

                    Function                           Location

  15-pin game port - internal                             CN1

  40-pin IDE (AT) Interface connector                     CN2

  34-pin control cable connector - floppy drive           CN3

  10-pin serial port (COM2/4) - internal                  CN4

  10-pin serial port (COM1/3) - internal                  CN5

  25-pin parallel port (LPT1/2) - external                CN6

  4-pin connector - drive active LED                      JP1

                        USER CONFIGURABLE SETTINGS

              Function                    Location            Setting

  »   Serial Port 1 (CN5) enabled            JP2             pins 1 & 2
                                                              closed

      Serial Port 1 (CN5) disabled           JP2             pins 2 & 3
                                                              closed

  »   Game Port (CN1) enabled                JP3             pins 1 & 2
                                                              closed

      Game Port (CN1) disabled               JP3             pins 2 & 3
                                                              closed

  »   Floppy drive enabled                   JP4             pins 1 & 2
                                                              closed

      Floppy drive disabled                  JP4             pins 2 & 3
                                                              closed

  »   Parallel Port (CN6) address            JP5             pins 1 & 2
      is 378h (LPT1)                                          closed

      Parallel Port (CN6) address            JP5             pins 2 & 3
      is 278h (LPT2)                                          closed

  »   Serial Port 1 (CN5) is set to          JP6             pins 1 & 2
      COM1 (3F8h)                                             closed

      Serial Port 1 (CN5) is set to          JP6             pins 2 & 3
      COM3 (3E8h)                                             closed

  »   Serial Port 2 (CN4) enabled            JP7             pins 1 & 2
                                                              closed

      Serial Port 2 (CN4) disabled           JP7             pins 2 & 3
                                                              closed

  »   Serial Port 2 (CN4) is set to          JP8             pins 1 & 2
      COM2 (2F8h)                                             closed

      Serial Port 2 (CN4) is set to          JP8             pins 2 & 3
      COM4 (2E8h)                                             closed

  »   I/O Channel Ready signal               JP9               open
      disabled

      I/O Channel Ready signal               JP9              closed
      enabled