GOLDSTAR ELECTRONICS INTERNATIONAL, INC.

IODE-32924

  Data bus:                  16-bit, ISA

  Size:                      Half-length, half-height card

  Hard drive supported:      Two IDE (AT) Interface drives

  Floppy drives supported:   Two 360KB, 720KB, 1.2MB, or 1.44MB drives

[Image]

                              CONNECTIONS

                    Function                           Location

  40-pin IDE (AT) Interface connector                     CN1

  34-pin control cable connector - floppy drive           CN2

  16-pin game port - internal                             CN3

  10-pin serial port (COM2/4) - internal                  CN4

  9-pin serial port (COM1/3) - external                   CN5

  25-pin parallel port (LPT1/2) - external                CN6

  2-pin connector - drive active LED                      JP1

                        USER CONFIGURABLE SETTINGS

              Function                    Location            Setting

  »   Floppy drive enabled                   JP2             pins 1 & 2
                                                              closed

      Floppy drive disabled                  JP2             pins 2 & 3
                                                              closed

  »   Parallel Port (CN6) enabled            JP3             pins 1 & 2
                                                              closed

      Parallel Port (CN6) disabled           JP3             pins 2 & 3
                                                              closed

  »   Serial Port 1 (CN5) enabled            JP4             pins 1 & 2
                                                              closed

      Serial Port 1 (CN5) disabled           JP4             pins 2 & 3
                                                              closed

  »   Serial Port 2 (CN4) enabled            JP5             pins 1 & 2
                                                              closed

      Serial Port 2 (CN4) disabled           JP5             pins 2 & 3
                                                              closed

  »   Game Port (CN3) enabled                JP6             pins 1 & 2
                                                              closed

      Game Port (CN3) disabled               JP6             pins 2 & 3
                                                              closed

  »   Hard drive enabled                     JP7             pins 1 & 2
                                                              closed

      Hard drive disabled                    JP7             pins 2 & 3
                                                              closed

  »   Parallel Port (CN6) address            JP9             pins 1 & 2
      is 378h                                                 closed

      Parallel Port (CN6) address            JP9             pins 2 & 3
      is 278h                                                 closed

  »   Serial Port 1 (CN5) is set to         JP10             pins 1 & 2
      COM1 (3F8h)                                             closed

      Serial Port 1 (CN5) is set to         JP10             pins 2 & 3
      COM3 (3E8h)                                             closed

  »   Serial Port 2 (CN4) is set to         JP11             pins 1 & 2
      COM2 (2F8h)                                             closed

      Serial Port 2 (CN4) is set to         JP11             pins 2 & 3
      COM4 (2E8h)                                             closed

  »   Hard drive port address is            JP12             pins 1 & 2
      1F0-1F7h                                                closed

      Hard drive port address is            JP12             pins 2 & 3
      170-177h                                                closed

  »   Serial Port 1 (CN5) uses IRQ4         JP16             pins 1 & 2
                                                              closed

      Serial Port 1 (CN5) uses IRQ3         JP16             pins 2 & 3
                                                              closed

  »   Serial Port 2 (CN4) uses IRQ3         JP17             pins 1 & 2
                                                              closed

      Serial Port 2 (CN4) uses IRQ4         JP17             pins 2 & 3
                                                              closed