UNIDENTIFIED

SAI2S13 MULTI I/O PLUS

  Data bus:                  16-bit, ISA

  Size:                      Half-length, half-height card

  Hard drive supported:      Two IDE (AT) Interface drives

  Floppy drives supported:   Two 360KB, 720KB, 1.2MB, or 1.44MB drives

[Image]

                              CONNECTIONS

                    Function                           Location

  25-pin parallel port (LPT1/2) - external                CN1

  15-pin game port - internal                             CN2

  10-pin serial port 1 (COM1/3) - external                CN3

  10-pin serial port 2 (COM2/4) - internal                CN4

  34-pin control cable connector - floppy drive           CN5

  40-pin IDE (AT) Interface connector                     CN6

  2-pin connector - drive active LED                      JP1

                        USER CONFIGURABLE SETTINGS

              Function                    Location            Setting

  »   Hard drive enabled                     J1              pins 1 & 2
                                                              closed

      Hard drive disabled                    J1              pins 2 & 3
                                                              closed

  »   Floppy drive enabled                   J2              pins 1 & 2
                                                              closed

      Floppy drive disabled                  J2              pins 2 & 3
                                                              closed

  »   Serial Port 2 (CN4) enabled            J3              pins 1 & 2
                                                              closed

      Serial Port 2 (CN4) disabled           J3              pins 2 & 3
                                                              closed

  »   Serial Port 2 (CN4) is set to          J4              pins 1 & 2
      COM2                                                    closed

      Serial Port 2 (CN4) is set to          J4              pins 2 & 3
      COM4                                                    closed

  »   Serial Port 1 (CN3) enabled            J5              pins 1 & 2
                                                              closed

      Serial Port 1 (CN3) disabled           J5              pins 2 & 3
                                                              closed

  »   Serial Port 1 (CN3) is set to          J6              pins 1 & 2
      COM1                                                    closed

      Serial Port 1 (CN3) is set to          J6              pins 2 & 3
      COM3                                                    closed

  »   Parallel Port (CN1) enabled            J7              pins 1 & 2
                                                              closed

      Parallel Port (CN1) disabled           J7              pins 2 & 3
                                                              closed

  »   Parallel Port (CN1) is set to          J8              pins 1 & 2
      LPT1                                                    closed

      Parallel Port (CN1) is set to          J8              pins 2 & 3
      LPT2                                                    closed