JPN CORPORATION

CA9077

  Data bus:                  16-bit, ISA

  Size:                      Half-length, half-height card

  Hard drive supported:      Two IDE (AT) Interface drives

  Floppy drives supported:   Four 360KB, 720KB, 1.2MB, 1.44MB, or 2.88MB
                             drives

[Image]

                               CONNECTIONS

                     Function                             Location

  34-pin control cable connector - floppy drive 0           CN1

  34-pin control cable connector - floppy drive 1           CN2

  40-pin IDE (AT) Interface connector                       CN3

  2-pin connector - drive active LED                        CN4

                            BIOS ADDRESS - JP3

   Address     Jumper    Jumper    Jumper3    Jumper    Jumper     Jumper
                 1         2                    4         5          6

  »   C800h    closed     open      open       open      open      open

      CC00h     open     closed     open       open      open      open

      D000h     open      open     closed      open      open      open

      D400h     open      open      open      closed     open      open

      D800h     open      open      open       open     closed     open

      DC00h     open      open      open       open      open     closed

                        USER CONFIGURABLE SETTINGS

              Function                    Location            Setting

  »   Hard drive enabled                     JP4             pins 1 & 2
                                                              closed

      Hard drive disabled                    JP4             pins 2 & 3
                                                              closed

                       MISCELLANEOUS TECHNICAL NOTES

    Jumper JP1 is factory configured to pins 1 & 2 closed; jumper JP2 is
   factory configured to pins 1 & 2 closed and pins 3 & 4 closed - do not
                           alter these settings.