GSI, INC.

MODEL 18 INTELLIGENT IDEA

  Data bus:                  16-bit, ISA

  Size:                      Half-length, half-height card

  Hard drive supported:      Two IDE (AT) Interface drives

  Floppy drives supported:   None

[Image]

                      CONNECTIONS

               Function                   Location

  5-pin connector - DC power                 J5

  40-pin IDE(AT) Interface connector         J6

  4-pin connector - Drive active LED         J8

                               BIOS ADDRESS

  Settings for Model 18 with
    Part # 1533-18-03-1 or
           earlier

              Address              J4/jumper 1            J4/jumper 2

            C800-C9FFh          pins 1 & 2 closed      pins 1 & 2 closed

  »         D800-D9FFh          pins 2 & 3 closed      pins 1 & 2 closed

            DC00-DDFFh          pins 2 & 3 closed      pins 2 & 3 closed

            E000-E1FFh          pins 1 & 2 closed      pins 2 & 3 closed

                        USER CONFIGURABLE SETTINGS

              Function                     Location           Setting

  »   Hard drive port address is         JP4/jumper 2        pins 1 & 2
      1F0-1F7h (secondary)                                     closed

      Hard drive port address is         JP4/jumper 2        pins 2 & 3
      1F0-1F7h (primary)                                       closed

                               BIOS ADDRESS

  Settings for Model 18 with
    Part # 1533-18-04-7 or
            later

             Address               J4/jumper 3            J4/jumper 4

            C800-C9FFh          pins 1 & 2 closed      pins 1 & 2 closed

  »         D000-D1FFh          pins 1 & 2 closed      pins 2 & 3 closed

            D800-D9FFh          pins 2 & 3 closed      pins 1 & 2 closed

            E000-E1FFh          pins 2 & 3 closed      pins 2 & 3 closed

                       MISCELLANEOUS TECHNICAL NOTES

  Model 18 with Part # 1533-18-03-1 or earlier does not support hard
  drive port address 1F0-1F7h.

  J4/jumper 3 and J4/jumper 4 are not used on Model 18 with Part #
  1533-18-03-1 or earlier.

  J4/jumper 1 is not used on Model 18 with Part # 1533-18-04-7 or later.