KIMPSION INTERNATIONAL

IDE4 - AT BUS/FLOPPY DISK CONTROLLER

  Data bus:                  16-bit, ISA

  Size:                      Half-length, full-height card

  Hard drive supported:      Two IDE (AT) Interface drives

  Floppy drives supported:   Two 360KB, 720KB, 1.2MB, or 1.44MB drives

[Image]

                              CONNECTIONS

                    Function                           Location

  40-pin IDE(AT) Interface connector                      CN1

  34-pin control cable connector - floppy drive           CN2

  4-pin connector - Drive active LED                      JP4

                        USER CONFIGURABLE SETTINGS

              Function                    Location            Setting

  »   Floppy drive enabled                   JP2               open

      Floppy drive disabled                  JP2              closed

  »   Hard drive enabled                     JP3               open

      Hard drive disabled                    JP3              closed