KIMPSION INTERNATIONAL

IDE1 - AT BUS/FLOPPY DISK CONTROLLER

  Data bus:                  16-bit, ISA

  Size:                      Half-length, full-height card

  Hard drive supported:      Two IDE (AT) Interface drives

  Floppy drives supported:   Two 360KB, 720KB, 1.2MB, or 1.44MB drives

[Image]

                            CONNECTIONS

                   Function                          Location

  40-pin AT Interface (IDE) connector                   J1

  34-pin control cable connector-floppy drive           J4

  4-pin connector-Drive active LED                      J6

                        USER CONFIGURABLE SETTINGS

               Function                    Location           Setting

  »   Hard drive Interrupt is IRQ14          JP2             pins 2 & 3
                                                              closed

      Hard drive Interrupt is                JP2             pins 1 & 2
      disabled                                                closed

  »   1.2MB floppy drive support             JP3             pins 2 & 3
      enabled                                                 closed

      360KB floppy drive support             JP3             pins 1 & 2
      enabled                                                 closed

  »   Floppy drive enabled                   JP7             pins 2 & 3
                                                              closed

      Floppy drive disabled                  JP7             pins 1 & 2
                                                              closed

  »   Hard drive enabled                     JP8             pins 1 & 2
                                                              closed

      Hard drive disabled                    JP8             pins 2 & 3
                                                              closed