UNIDENTIFIED

DLW-200 SUPER IDE CONTROLLER CARD

  Data bus:                  16-bit, ISA

  Size:                      Half-length, full-height card

  Hard drive supported:      Two IDE(AT) Interface drives

  Floppy drives supported:   Two 360KB, 720KB, 1.2MB, or 1.44MB drives

[Image]

                              CONNECTIONS

                     Function                            Location

  34-pin control cable connection - floppy drive            J1

  40-pin IDE(AT) Interface connector                        J2

  15-pin game port - external                               J3

  10-pin serial port 1 - internal                           J4

  10-pin serial port 2 - internal                           J6

  25-pin parallel port - external                           J7

  2-pin connector - Drive Active LED                       JP1

                        SERIAL PORT 1 CONFIGURATION

            COM                 JP2/jumper 1            JP2/jumper 2

           Disabled           pins 1 & 2 closed       pins 1 & 2 closed

  »          COM1             pins 2 & 3 closed       pins 1 & 2 closed

             COM3             pins 1 & 2 closed       pins 2 & 3 closed

             COM4             pins 2 & 3 closed       pins 2 & 3 closed

                        SERIAL PORT 2 CONFIGURATION

            COM                 JP2/jumper 3            JP2/jumper 4

           Disabled           pins 1 & 2 closed       pins 1 & 2 closed

  »          COM2             pins 2 & 3 closed       pins 1 & 2 closed

             COM4             pins 1 & 2 closed       pins 2 & 3 closed

             COM3             pins 2 & 3 closed       pins 2 & 3 closed

                        PARALLEL PORT CONFIGURATION

            LPT                 JP2/jumper 5            JP2/jumper 6

           Disabled           pins 1 & 2 closed       pins 1 & 2 closed

             LPT2             pins 2 & 3 closed       pins 1 & 2 closed

  »          LPT1             pins 1 & 2 closed       pins 2 & 3 closed

             LPT3             pins 2 & 3 closed       pins 2 & 3 closed

                        USER CONFIGURABLE SETTINGS

              Function                    Location            Setting

  »   Parallel port is set for               JP3              closed
      output

      Parallel port is set for               JP3               open
      input

  »   Hard drive port address is        JP4/jumper 1         pins 1 & 2
      1F0-1F7, 3F6-3F7h                                       closed

      Hard drive port address is        JP4/jumper 1         pins 2 & 3
      170-177, 376-377h                                       closed

  »   Hard drive enabled                JP4/jumper 2         pins 2 & 3
                                                              closed

      Hard drive disabled               JP4/jumper 2         pins 1 & 2
                                                              closed

  »   Floppy drive port address is      JP4/jumper 3         pins 1 & 2
      3F0-3F7h                                                closed

      Floppy drive port address is      JP4/jumper 3         pins 2 & 3
      370-377h                                                closed

  »   Floppy drive enabled              JP4/jumper 4         pins 2 & 3
                                                              closed

      Floppy drive disabled             JP4/jumper 4         pins 1 & 2
                                                              closed

                      SERIAL PORT 1 INTERRUPT REQUEST

       IRQ            J5/jumper 1       J5/jumper 2        J5/jumper 3

  »      IRQ4           closed              open               open

         IRQ3            open              closed              open

         IRQ5            open               open              closed

                      SERIAL PORT 2 INTERRUPT REQUEST

       IRQ            J5/jumper 4       J5/jumper 5        J5/jumper 6

  »      IRQ3           closed              open               open

         IRQ4            open              closed              open

         IRQ5            open               open              closed

                      PARALLEL PORT INTERRUPT REQUEST

           IRQ                 J5/jumper 7              J5/jumper 8

  »         IRQ7                  closed                    open

            IRQ5                   open                    closed