UNIDENTIFIED

KT-IDE PLUS-V2

  Data bus:                  16-bit, ISA

  Size:                      Half-length, full-height card

  Hard drive supported:      Two IDE(AT) Interface drives

  Floppy drives supported:   Two 360KB, 720KB, 1.2MB, or 1.44MB drives

[Image]

                              CONNECTIONS

                     Function                            Location

  40-pin IDE(AT) Interface connector                       CN1

  34-pin control cable connection - floppy drive           CN2

  10-pin serial port 2 - internal                          CN3

  10-pin serial port 1 - internal                          CN4

  15-pin game port - external                              CN5

  25-pin parallel port - external                          CN6

  2-pin connector - Drive Active LED                       CN7

                        PARALLEL PORT CONFIGURATION

              LPT                   Jumper JP1            Jumper JP2

  »       LPT3 (278-27Fh)         pins 1-2 closed       pins 1-2 closed

          LPT2 (378-37Fh)         pins 2-3 closed       pins 1-2 closed

          LPT1 (3BC-3BFh)         pins 1-2 closed       pins 2-3 closed

             Disabled             pins 2-3 closed       pins 2-3 closed

                        USER CONFIGURABLE SETTINGS

               Function                    Location           Setting

  »   Floppy drive enabled                    JP6             pins 1-2
                                                              closed

      Floppy drive disabled                   JP6             pins 2-3
                                                              closed

  »   Two floppy drives supported             JP7             pins 1-2
                                                              closed

  »   Factory configured - do not             JP7             pins 2-3
      alter                                                   closed

  »   Factory configured - do not             JP9             unknown
      alter

  »   Factory configured - do not            JP10             unknown
      alter

                         SERIAL PORT CONFIGURATION

      CN4            CN3         Jumper JP3    Jumper JP4     Jumper JP5

     COM1            COM2         pins 1-2       pins 1-2      pins 1-2
                                   closed        closed         closed

     COM2            COM1         pins 1-2       pins 1-2      pins 2-3
                                   closed        closed         closed

     COM1          Disabled       pins 1-2       pins 2-3      pins 1-2
                                   closed        closed         closed

     COM2          Disabled       pins 1-2       pins 2-3      pins 2-3
                                   closed        closed         closed

   Disabled          COM2         pins 2-3       pins 1-2      pins 1-2
                                   closed        closed         closed

   Disabled          COM1         pins 2-3       pins 1-2      pins 2-3
                                   closed        closed         closed

   Disabled        Disabled       pins 2-3       pins 2-3      pins 1-2
                                   closed        closed         closed

   Disabled        Disabled       pins 2-3       pins 2-3      pins 2-3
                                   closed        closed         closed