DD&TT ENTERPRISE USA COMPANY

DT-3767

  Data bus:                  16-bit, ISA

  Size:                      Half-length, full-height card

  Hard drive supported:      Two IDE(AT) Interface drives

  Floppy drives supported:   Two 360KB, 720KB, 1.2MB, or 1.44MB drives

[Image]

                            CONNECTIONS

                   Function                          Location

  40-pin IDE(AT) Interface connector                    J1

  34-pin control cable connector-floppy drive           J2

  2-pin connector-Drive active LED                     JP2

                        USER CONFIGURABLE SETTINGS

               Function                    Location           Setting

  »   Direct IRQ14 control                    JP1            Pins 1 & 2
                                                              closed

      Select SLAVE/ACTIVE control             JP1            Pins 2 & 3
                                                              closed

  »   Floppy drive enabled                    JP3              open

      Floppy drive disabled                   JP3             closed

  »   Hard drive (CS0) port address           JP4            Pins 2 & 3
      is 1F0-1F7h                                             closed

      Hard drive (CS0) port address           JP4            Pins 1 & 2
      is 170-177h                                             closed

      Hard drive disabled                  JP4 & JP5           open

  »   Hard drive (CS1) port address           JP5            Pins 2 & 3
      is 3F0-3F7h                                             closed

      Hard drive (CS1) port address           JP5            Pins 1 & 2
      is 370-377h                                             closed