ULTRASTOR CORPORATION

ULTRA 14FB

Data bus:                16-bit, ISA
Size:                    Three/quarter-length, full-height card
Hard drive supported:    Up to seven SCSI drives
Floppy drives supported: Two 360KB, 720KB, 1.2MB, or 1.44MB drives

[Image]

                           CONNECTIONS

                    Function                         Location

  50-pin SCSI connector - internal                      J1

  50-pin SCSI connector - external                      J2

  34-pin control cable connector - floppy drive         J3

  4-pin connector - Drive active LED                   JP3

                               BIOS ADDRESS*

      Address         JP11/jumper 1     JP11/jumper 2     JP11/jumper 3

  »     Disabled          open              open               open

         C400h            open              open              closed

         C800h            open             closed              open

         CC00h            open             closed             closed

         D000h           closed             open               open

         D400h           closed             open              closed

         D800h           closed            closed              open

         DC00h           closed            closed             closed

                         I/O PORT ADDRESS*

     Address      JP12/jumper 1    JP12/jumper 2    JP12/jumper 3

      330h             open             open            open

      340h             open             open           closed

      310h             open            closed           open

      230h             open            closed          closed

      240h            closed            open            open

      210h            closed            open           closed

      130h            closed           closed           open

      140h            closed           closed          closed

                        USER CONFIGURABLE SETTINGS

              Function                     Location           Setting

  »   Floppy drive enabled                   JP2               closed

      Floppy drive disabled                  JP2                open

  »   SCSI Termination enabled               JPTP              closed

      SCSI Termination disabled              JPTP               open

  »   I/O and BIOS Address is           JP12/jumper 4           open
      software configured

      I/O and BIOS Address is           JP12/jumper 4          closed
      jumper configured

                       MISCELLANEOUS TECHNICAL NOTES

  * When JP12/jumper 4 is open (factory default), I/O and BIOS address is
                           software configured.

          All other jumpers are factory configured - do not alter