UNIDENTIFIED

BI-030C

  Q1 /93

Data bus: 16-bit, ISA

Size: Half-length, half-height card

Hard drives supported: Two IDE (AT) Interface drives

Floppy drives supported: Two 360KB, 720KB, 1.2MB or 1.44MB drives

[Image]

                           CONNECTIONS

                  Function                        Location

  40-pin IDE (AT) Interface connector                CN1

  34-pin data cable connector-floppy drives          CN2

  2-pin connector-drive active LED                   CN3

                        USER CONFIGURABLE SETTINGS

               Function                    Location           Setting

  »   Hard drive controller enabled           JP1            pins 2 & 3
                                                              closed

      Hard drive controller disabled          JP1            pins 1 & 2
                                                              closed

  »   Floppy drive controller                 JP2            pins 2 & 3
      enabled                                                 closed

      Floppy drive controller                 JP2            pins 1 & 2
      disabled                                                closed

        MISCELLANEOUS TECHNICAL NOTES

  This controller has no on-board software.