PERCEPTIVE SOLUTIONS, INC. EASYCACHE ESDI, EASYCACHE PRO ESDI Data bus: 16-bit, ISA Size: Full-length, full-height card Hard Drives Suppported: Two ESDI drives Floppy Drives Supported: Two 360KB, 720KB, 1.2MB, or 1.44MB drives [Image] CONNECTIONS Function Location 4-pin connector-drive active LED J1 9-pin serial port J2 20-pin data cable connector-drive 0 J3 20-pin data cable connector-drive 1 J4 34-pin control cable connector-hard drive J5 34-pin control cable connector-floppy drive J6 USER CONFIGURABLE SETTINGS Function Location Setting » Hard drive port address SW1/switch 3 off 1F0-1F7, 3F0-3F1, 3F7h Hard drive port address SW1/switch 3 on 170-177, 370-371, 377h » Floppy drive enabled SW1/switch 4 off Floppy drive disabled SW1/switch 4 on » Single-speed floppy supported SW1/switch 5 off Dual-speed floppy supported SW1/switch 5 on » Factory configured - do not SW1/switch 10 off alter » hSOS load enabled SW1/switch 11 off hSOS load disabled SW1/switch 11 on » Factory configured - do not SW1/switch 12 off alter BIOS ADDRESS Address SW1/switch 1 SW1/switch 2 » D800h on off D000h off on C800h off off Disabled on on INTERRUPT REQUEST IRQ SW1/switch SW1/switch SW1/switch SW1/switch 9 6 7 8 » IRQ14 off off on off IRQ5 on off off off IRQ12 off on off off IRQ15 off off off on Disabled off off off off CACHE MEMORY CONFIGURATION Size Bank 0 Bank 1 512KB (2) 256K x 9 NONE 1MB (2) 256K x 9 (2) 256K x 9 2MB (2) 1M x 9 NONE 2.5MB (2) 1M x 9 (2) 256K x 9 4MB (2) 1M x 9 (2) 1M x 9 8MB* (2) 4M x 9 NONE 8.5MB* (2) 4M x 9 (2) 256K x 9 10MB* (2) 4M x 9 (2) 1M x 9 16MB* (2) 4M x 9 (2) 4M x 9 Notes:* 4MBx9 SIMM's are supported only by the easyCACHE Pro controlller LED INFORMATION Hard drive read, write, or seek in progress. D1 Lights solid to indicate dirty cache Data transfer between cache and host in progress. D2