MULTIBEST INDUSTRIAL & MANUFACTURING INC.

TRUMP CARD

Data bus: 16-bit, ISA

Size: Half-length, full-height card

Hard drives supported: Two AT Interface (IDE) drives

Floppy drives supported: Two 360KB, 720KB, 1.2MB, or 1.44MB

[Image]

                          CONNECTIONS

                    Function                       Location

  40-pin AT Interface (IDE) connector-internal        J1

  34-pin control cable connector floppy drive         J2

  25-pin parallel port (LPT1/2)-external              J3

  9-pin serial port (COM1/3) external                 J4

  9-pin serial port (COM2/4) internal                 J5

                        USER CONFIGURABLE SETTINGS

               Function                    Location           Setting

  »   Hard drive enabled                     JP2B              closed

      Hard drive disabled                    JP2B               open

  »   Single speed floppy drives             JP2E               open

      Dual speed floppy drives               JP2E              closed

  »   Direct IRQ                             JP2F            pins 1 & 2
                                                               closed

      Delay IRQ (used when drive has         JP2F            pins 2 & 3
      difficulty)                                              closed

    FLOPPY DRIVE CONFIGURATION

  Function     JP2C        JP2D

  Enabled     closed      closed

  Disabled     open        open

                        PARALLEL PORT CONFIGURATION

        LPT               JP1A              JP1B               JP2A

   LPT1 enabled         pins 2 & 3         closed              open
                         closed

   LPT2 enabled         pins 1 & 2         closed             closed
                         closed

     Disabled           pins 1 & 2          open            pins 1 & 2
                         closed                               closed

                         SERIAL PORT CONFIGURATION

          Port 1                 JP1C & JP1D             JP1E & JP1F

  »        COM1 (CN4)                N/A              pins 1 & 2 closed

           COM3 (CN4)                N/A              pins 2 & 3 closed

           COM2 (CN5)         pins 1 & 2 closed              N/A

           COM4 (CN5)         pins 2 & 3 closed              N/A