KIMPSION INTERNATIONAL

WA6-V4

  Q4 /92

Data bus: 16-bit, ISA

Size: Full-length, half-height card

Hard drives supported: Two MFM ST506 drives

Floppy drives supported: Four 360KB, 720KB, 1.2MB, or 1.44MB

Sector interleave: 1:1

[Image]

                                CONNECTIONS

                     Function                             Location

  4-pin connector-drive active LED                           CN1

  20-pin data cable connector-drive 1                        CN2

  20-pin data cable connector-drive 0                        CN3

  34-pin control cable connector-hard drive                  CN4

  34-pin data cable connector-floppy drives 0 and            CN7
  1

  34-pin data cable connector-floppy drives 2 and            CN8
  3

                        USER CONFIGURABLE SETTINGS

              Function                    Location            Setting

  »   Hard drive port address is             JP5             pins 2 & 3
      1F0-1F7h                                                closed

      Hard drive port address is             JP5             pins 1 & 2
      170-177h                                                closed

  »   Floppy drive port address for          JP6             pins 2 & 3
      CN7 is 3F0-3F7h                                         closed

      Floppy drive port address for          JP6             pins 1 & 2
      CN7 is 370-377h                                         closed

  »   Bracket ground option                  JP9               open
      disabled

      Bracket ground option enabled          JP9              closed

  »   Floppy drive port address for         JP10              closed
      CN8 is 370-377h

      Floppy drive port address for         JP10               open
      CN8 is 3F0-3F7h

                       DRIVE SELECT MODE JUMPERS

       Drive Size         Switch 1, 3, 5 or 7    Switch 2, 4, 6, or 8

         360KB                    on                      on

         720KB                    on                      off

         1.2KB                    off                     on

         1.44KB                   off                     off

               Floppy drive 0 uses SW1/switches 1 and 2

               Floppy drive 1 uses SW1/switches 3 and 4

               Floppy drive 2 uses SW1/switches 5 and 6

               Floppy drive 3 uses SW1/switches 7 and 8