ACCULOGIC, INC.

SIDE-2

  DATA BUS:                                                      16-BIT,
                                                                 ISA

  Size:                    Half-length, half-height card

  Hard drives supported:   Two IDE(AT) drives

  Floppy drives            None
  supported:

[Image]

                      CONNECTIONS

               Function                    Location

  4-pin connector-Drive Active LED            J1

  40-pin XT Interface (IDE) connector         J2

                        USER CONFIGURABLE SETTINGS

              Function                    Location            Setting

  »   Hard drive port address is             JP7               open
      1F0-1F7h

      Hard drive port address is             JP7              closed
      170-177h

  »   I/O Channel Ready signal              JP10               open
      disabled

      I/O Channel Ready signal              JP10              closed
      enabled

                               IRQ14 STATUS

               Function                   Jumper JP1        Jumper JP2

  »   IRQ14 normal                          closed             open

      IRQ14 delayed until ACTIVE-            open             closed
      signal is removed

          MISCELLANEOUS TECHNICAL NOTES

  JP3 through JP6, and JP8 & JP9 are Not used.