|This task shows you how to rotate a Waveguide part.|
|A waveguide part can only be rotated if it is in free space - connected components cannot be rotated.|
|1.||With your component displayed,
click and drag the compass and place it on the part you want to rotate.
|2.||Move the pointer to highlight the
compass for the desired direction of rotation.
|3.||At this point there are two methods
of rotating the part. If you know the exact amount of rotation
required, for example 90 degrees, double click on the highlighted arc
(visible in Step 2). The Compass Manipulation dialog box opens.
Enter the exact amount of rotation in the desired axis; in this case the Y
axis. Click Apply new position and then Close.
The alternate method is to grab the compass and rotate the part to the desired degree of rotation. (This is applicable only to round waveguides.)