Changing the Angle of a Segment
This task shows you how to change the angle of a pathway, boundary, or run segment.
1.
Place your cursor over the element and click the right mouse button.
2.
From the pull-down menu, select the element, or object, you want to modify and select
Definition
. The Run Definition dialog box is displayed.
3.
Place the cursor over the support line for that element and click the right mouse button.
4.
Select
Definition
from the pop-menu. The Segment Definition dialog box is displayed.
5.
Specify a new value for the Turn Angle. A line is displayed in the drawing to show the new position for the segment.
6.
Select
OK
on the Segment Definition dialog box.
7.
Select
OK
on the Run Definition dialog box to complete the change.
8.
To align a section's normal with the compass Z axis:
Bring up the Definition box for the section.
Place the compass on a 3-D element and adjust the Z axis to the angle you want.
Right click on the segment. A pop-up menu will show.
Click on
Rotate
section to compass Z direction. The normal of the section will rotate to align with the Z axis, as shown in the image below.