Routing a Run at a Slope

	This task shows you how to route a run at a slope.
	1.	At the point in your run at which you want to slope it click the Slope button in the Run dialog box.
	2.	Enter the degrees of slope you want.
	3.	Click the Section button and enter data about the type and size of run.
	4.	Continue creating your run. Click once to define the ending point of a segment. Click twice to end the run.
	Slope routing is intended for shallow rise or fall - usually 30 degrees or less. Use directional routing for sharper angles - more than 30 degrees.