Creating a flow path
only creates a flow connection between connectors. It does not define the
direction of flow, which is normally added later in the design process.
1.
Click on the Build Internal
Flow button and
then on the component. The connectors on the component are numbered and
displayed, and the Create
Flow Path dialog box is displayed.
2.
Click on the connectors between
which you want a flow path. The connectors will be highlighted as you click
on them and the flow path will display. At the same time, the two
connectors between which there is a flow path will appear in the Create
Flow Path box.
3.
To end click
Close.
4.
To delete a connection, bring up
the Create Flow Path box, select the connectors you want to delete, and
click Delete.