Create a Rough Turning Operation

task target This task shows you how to create a Longitudinal Rough Turning operation for machining part of the workpiece.

This operation will use the tool proposed by the program, so you just need to specify the geometry to be machined and set some of the machining parameters.

scenario 1. Select the Rough Turning icon .

A Rough Turning.1 entity along with a default tool is added to the program.

The Rough Turning dialog box appears directly at the Geometry tab page .
2. Click the red Stock area in the icon, then select the stock profile as shown.

Click OK in the Edge Selection toolbar to end your selection.

3. Click the red Part area in the icon, then select the part profile as shown.

Click OK in the Edge Selection toolbar to end your selection.

4. Select the Strategy tab page and set the parameters as shown.
5. Click OK to create the operation.

end of task