The chart below is a quick reference of some of the
resources included with this application (as of R14). Ways in which these
resources are used are described elsewhere in this user guide. Most
columns are self-explanatory. Some that may need additional information
are explained below. Controlled by PRM: Whether the resource has an entry in the project resource management file. Usually this is the location of the resource. NLS: National Language Support (NLS) files contain resource names that can be defined by the user. If you change to another language, for instance, you will need to change the names in the NLS files. In the column below, 'Yes" means that the files have terminology (such as the values of attributes) that needs to be changed if you change NLS files. NLS files are located in the directory: intel_a\resources\msgcatalog. Units: These files contain units that were defined in the metric system by default. If you choose to go to another system you must modify these files. Administrator: Files that have "No" against them cannot be modified. Others can be modified as noted. Depending on the file type, files can be modified using Wordpad (text or XML files), Excel, or within the relevant application itself (CATProduct, catalog or CATDrawing files). |
File name | File Type | Controlled by PRM | NLS | Units | Administrator | Contents |
Object ID Schema definition (startup\\EquipmentAndSystems\\HVAC\\DataDictionary) | ||||||
sch-CATHvaHVACPart | xml | Directory Path | Yes | No | Yes - Administrator | Object ID Schema Definition |
sch-CATPspHVACPartFunction | xml | Directory Path | Yes | No | Yes - Administrator | Object ID Schema Definition |
Design Rules setup data (startup\\EquipmentAndSystems\\HVAC\\DesignRules) | ||||||
HVACDesignRules | catalog | Yes | Yes | No | Yes - Administrator | Catalog containing the list of rules available for a project. |
HVAC-AttributeFilter | CATProduct | No | No | No | No | |
HVAC-AttributeFilter | txt | No | Yes | No | Yes - Administrator | Attribute filter used for catalog filtering |
HVAC-AutomaticParts | CATProduct | No | No | No | No | |
HVAC-AutomaticParts | txt | No | Yes | No | Yes - Administrator | Automatic parts rules. Used during parts placement |
HVAC-Compatibility | CATProduct | No | No | No | No | |
HVAC-Compatibility | txt | No | Yes | No | Yes - Administrator | Connectivity compatibility definition rules. Used during parts placement and catalog search. |
HVAC-CutoutClearance | CATProduct | No | No | No | No | |
HVAC-CutoutClearance | txt | No | No | Yes | Yes - Administrator | Defines the allowable penetration clearance values for Ducts. |
HVAC-FunctionPhysicalMapping | CATProduct | No | No | No | No | |
HVAC-FunctionPhysical | txt | No | Yes | No | Yes - Administrator | Function/Physical mapping rules. Used during parts placement and 2D/3D Integration and validation. |
AllDiagramsStarterDocument | CATProduct | No | No | No | Yes - Administrator | Schematic design starter document containing all sample rules and checks |
HVACDiagramStarterDocument | CATProduct | No | No | No | Yes - Administrator | HVAC schematic design starter document containing all HVAC sample rules and checks |
HVACDiagramChecks | CATProduct | No | No | No | Yes - Administrator | Document containing all sample design checks |
HVACDiagramRules | CATProduct | No | No | No | Yes - Administrator | Document containing all sample design rules |
Standard independent attributes (startup\EquipmentAndSystems\\HVAC\\DesignRules\\DiscreteValues) | ||||||
HVACShape | txt | No | No | No | Yes - Administrator | Discrete list that contain all the possible HVAC section shapes. Example: Round, Rectangular, etc. This list is used during HVAC part creation. |
HVACSymbolName | txt | No | Yes | No | Yes - Administrator | Discrete list of part symbols used during part creation. |
Part definition data (startup\\EquipmentAndSystems\\HVAC\\HVACDesign\\ComponentCatalogs) | ||||||
ConnectorAttributes | txt | Yes | Yes | No | Yes - Administrator | File contains the list of attributes that can be assigned to connectors. Used during part build. |
GraphicRepresentations | txt | Yes | Yes | No | Yes - Administrator | File contains the list of graphic representations(Single, Double, etc.). Used during part build. |
Parts Catalog (startup\\EquipmentAndSystems\\HVAC\\HVACDesign\\ComponentCatalogs\\Parametric) | ||||||
HVACParts.catalog | catalog | Yes | Yes | Yes | Yes - Administrator | HVAC Catalog points to all parts that can be placed using the "Place HVAC Parts" command. |
RCT_TEE_STRAIGHT | CATPart | No | Yes | Yes | Yes - Administrator | TEE part definition |
RCT_TEE_STRAIGHT_Single | CATShape | No | Yes | Yes | Yes - Administrator | TEE single line graphic representation |
RCT_TEE_STRAIGHT_Envelope | CATShape | No | Yes | Yes | Yes - Administrator | TEE envelope graphic representation |
RCT_ELBOW | CATPart | No | Yes | Yes | Yes - Administrator | Elbow part definition |
RCT_ELBOW_Single | CATShape | No | Yes | Yes | Yes - Administrator | Elbow Single line graphic representation |
RCT_ELBOW_Envelope | CATShape | No | Yes | Yes | Yes - Administrator | Elbow Single line graphic representation |
RCT_DUCT | CATPart | No | Yes | Yes | Yes - Administrator | Duct part definition |
xxxxxxx.CATPart | CATPart | No | Yes | Yes | Yes - Administrator | There are few more HVAC parts that are defined and included in the catalog. They are similar to what is listed above. These pars can be used as examples. Users can add more parts to address their design needs. |
Parts Catalog (startup\\EquipmentAndSystems\\HVAC\\HVACDesign\\ComponentCatalogs\\Parametric_EV5) | ||||||
HVACParts-NoShape.catalog | catalog | Yes | Yes | Yes | Yes - Administrator | HVAC Catalog points to all parts that can be placed using the "Place HVAC Parts" command. There are No graphic representations defined for these parts. |
xxxxxxx.CATPart | CATPart | No | Yes | Yes | Yes - Administrator | There are few more HVAC parts that are defined and included in the catalog. They are similar to what is listed above. These pars can be used as examples. Users can add more parts to address their design needs. |
Drawing Customization data (startup\EquipmentAndSystems\HVAC\HvacDesign\DrawingCatalogs) | ||||||
HVACPartsAnnotations | catalog | No | Yes | No | Yes - Administrator | Catalog containing the association between text template |
ATSDefinitions-HVACParts | CATDrawing | No | Yes | No | Yes - Administrator | Drawing document containing the text templates for 3D object classes. |
Diagram Component Catalogs (startup\EquipmentAndSystems\\HVAC\\HVACDiagrams\\ComponentCatalogs) | ||||||
HVAC_ANSI.catalog | catalog | Yes | No | No | Yes - Administrator | Parent catalog of HVAC diagram components |
HVAC_ANSI_Equipment.catalog | catalog | No | No | No | Yes - Administrator | Catalog of HVAC diagram components |
HVAC_ANSI_Equipment_.CATProduct | CATProduct | No | No | No | Yes - Administrator | Diagram reference components |
HVAC_ANSI_HVACFunctions.catalog | catalog | No | No | No | Yes - Administrator | Catalog of HVAC diagram components |
HVAC_ANSI_HVACFunction_.CATProduct | CATProduct | No | No | No | Yes - Administrator | Diagram reference components |
HVAC_ANSI_OffSheets.catalog | catalog | Yes | No | No | Yes - Administrator | Catalog of HVAC diagram off sheets |
HVAC_ANSI_OffSheets_.CATProduct | CATProduct | No | No | No | Yes - Administrator | Diagram off sheets |
Insulation Specification data (startup\EquipmentAndSystems\HVAC\InsulationSpecification and A) | ||||||
InsulationSpecifications | catalog | Yes | Yes | Yes | Yes - Administrator | Insulation specification catalog for HVAC. This catalog will contain the insulation specification and the insulation thickness that will be used during the design process. Specifically when HVAC lines are created. |
A-DuctThicknessRule | CATProduct | No | No | No | ||
A-InsulationThicknessRangeTable-Inch | txt | No | Yes | Yes | Yes - Administrator | HVAC Insulation thickness definition file. It contains the insulation thickness value with respect to size and temperature. |
Duct Specification data (startup\EquipmentAndSystems\HVAC\MaterialSpecification) | ||||||
MaterialSpecifications.catalog | catalog | Yes | Yes | Yes | Yes - Administrator | Specification catalog. This catalog will be used during HVAC parts placement. It will be used for parts and material selection. |
Duct Specification data (startup\EquipmentAndSystems\HVAC\MaterialSpecification\A-GA-Wxx) | ||||||
A-GA-W01-FuncPhysMap-Rect | CATProduct | No | No | No | No | |
A-GA-W01-FuncPhysRect-Branch | txt | No | No | Yes | Yes - Administrator | Function/Physical mapping rules for rectangular HVAC branch parts. Used during parts placement |
A-GA-W01-FuncPhysRect-BranchCnx | txt | No | No | Yes | Yes - Administrator | Function/Physical mapping rules for rectangular HVAC branch connections. Used during parts placement |
A-GA-W01-FuncPhysRect-Duct | txt | No | No | Yes | Yes - Administrator | Function/Physical mapping rules for rectangular HVAC ducts. Used during parts placement |
A-GA-W01-FuncPhysRect-Inline | txt | No | No | Yes | Yes - Administrator | Function/Physical mapping rules for rectangular HVAC In-Line parts. Used during parts placement |
A-GA-W01-FuncPhysRect-Reducer | txt | No | No | Yes | Yes - Administrator | Function/Physical mapping rules for rectangular HVAC reducing parts. Used during parts placement |
A-GA-W01-FuncPhysRect-Valve | txt | No | No | Yes | Yes - Administrator | Function/Physical mapping rules for rectangular HVAC valves. Used during parts placement |
A-GA-W01-FuncPhysXxxx-Yyyyy | txt | No | No | Yes | Yes - Administrator | Function/Physical mapping rules. Used during parts placement for other HVAC shapes such as: Round, Round corner, and Flat Oval. |
Sample Data (startup\\EquipmentAndSystems\\HVAC\\SampleData) | ||||||
Drawing Annotation Data for Diagrams |
||||||
HVACAnnotations | catalog | No | Yes | No | Yes - Administrator | Catalog containing hierarchy of sample diagram text templates |
HVACCutLengthReportSample | txt | No | Yes | No | Yes - Administrator | Sample report for generating Duct cut length. Definition is in txt file format. |
HVACCutLengthReportSample | xls | No | Yes | No | Yes - Administrator | Sample report for generating Duct cut length. Definition is in Excel file format. |
Design Rules |
||||||
Import Line List XML Definition |
||||||
HVACLineIDImportSample | xml | No | Yes | Yes | Yes - Administrator | Sample HVAC line definition. This XML file when imported will generate the sample HVAC line list. |
Sample Reports |
||||||
HVACDiagramPartReportSample | txt | No | Yes | No | Yes - Administrator | Sample parts list report in txt file |
HVACDiagramPartReportSample | xls | No | Yes | No | Yes - Administrator | Sample parts list report in Excel file |
HVACPartsListReportSample | txt | No | Yes | No | Yes - Administrator | Sample parts list report in txt file |
HVACPartsListReportSample | xls | No | Yes | No | Yes - Administrator | Sample parts list report in Excel file |
HVACFromToReportSample.txt | txt | No | Yes | No | Yes - Administrator | This report contains the From component and the TO component for every line that is reported. |
HVACFromToReportSample.xls | txt | No | Yes | No | Yes - Administrator | This report contains the From component and the TO component for every line that is reported. |
HVACLineAttributeFilter | txt | No | Yes | No | Yes - Administrator | Name of the attributes that will be used to filter the HVAC lines within the HVAC Select line interactive command. |
HVACSpecificationStatusReportSample | txt | No | Yes | No | Yes - Administrator | Sample report for generating In-Spec or Out-Of-Spec status. Report definition is in txt format. |
HVACSpecificationStatusReportSample | xls | No | Yes | No | Yes - Administrator | Sample report for generating In-Spec or Out-Of-Spec status. Report definition is in Excel format. |
HVAC Lines data (startup\\EquipmentAndSystems\\HVAC\\SampleData\\HVACLines) | ||||||
CATPspHVACLine | catalog | Yes | Yes | No | Yes - Administrator | HVAC Line catalog. Contains a list of all the sample HVAC lines. |
CATPspHVACLine20020322162259 | CATProduct | No | Yes | Yes | Yes - Administrator | Sample HVAC line definition file. There are more lines in this directory, however, the definition is identical. |
Standards definition (startup\\EquipmentAndSystems\\HVAC\\Standards and ASHRAE92) | ||||||
HVACStandards | catalog | Yes | Yes | No | Yes - Administrator | Standard catalog. Contains definition of data/rules that will vary by standard. |
ASHRAE92-Diameter | txt | No | Yes | Yes | Yes - Administrator | List of discrete values that are allowed as a valid diameter for round duct. |
ASHRAE92-DuctMaterialCategory | txt | No | Yes | No | Yes - Administrator | List of discrete values that are allowed as a valid material category. |
ASHRAE92-DuctPressureClassRating | txt | No | Yes | No | Yes - Administrator | List of discrete values that are allowed as a valid duct pressure class rating. |
ASHRAE92-EndStyle | txt | No | Yes | No | Yes - Administrator | List of discrete values that are allowed as a valid HVAC end styles. |
ASHRAE92-Height | txt | No | Yes | Yes | Yes - Administrator | List of discrete values that are allowed as a valid Height for rectangular duct. |
ASHRAE92-InsulationMaterialCategory | txt | No | Yes | No | Yes - Administrator | List of discrete values that are allowed as a valid insulation material category. |
ASHRAE92-InsulationThicknessRange | txt | No | Yes | No | Yes - Administrator | List of discrete values that are allowed as a valid insulation thickness range. |
ASHRAE92-PartName | txt | No | Yes | No | Yes - Administrator | List of discrete values that are allowed as a valid part name. |
ASHRAE92-SystemType | txt | No | Yes | No | Yes - Administrator | List of discrete values that are allowed as a valid system type. |
ASHRAE92-WallThicknessRange | txt | No | Yes | No | Yes - Administrator | List of discrete values that are allowed as a valid wall thickness range. |
ASHRAE92-Width | txt | No | Yes | Yes | Yes - Administrator | List of discrete values that are allowed as a valid Width for rectangular duct. |