|
This task shows
you how to change the parameters of a part.
|
|
1. |
Select a part and click the Edit
Parameters button
. The Manage
Override Parameters dialog box displays.
|
|
2. |
The box displays parameters
that can be overridden for the part you selected. Parameters that
can be overridden are assigned to a part when you build a
part of a specified type. |
|
3. |
When you select the parameter
the current value appears in the = box next to Edit value of the
current parameter. |
|
4. |
Enter the new value and click Apply. |
|
5. |
When the option Keep Parameter Values
as Default is available you can use it to place parts (of the
same type) with the same values. To use it: Place a part in your
document, bring up the Manage Override Parameters dialog
box, and check the option. Parts you place subsequently will have the
same override parameter values as the part you just placed. This holds
true until you exit the command or change the option setting. This
option is not available with all commands. It only applies to override
parameters. |
|
6. |
The option Select Parameter Values
from Another Part allows you to apply the override parameter
values from a part to other placed parts. To use it: Select a part,
bring up the Manage Override Parameters dialog box, and
check the option, and select another part. The first part you select
will get its values from the second part. You can select other parts to
apply the same values. This option works with the same part type. It
only applies to override parameters. |
|
7. |
Click OK to close
the dialog box. |
|