| ISO 129-1 2004 |
Technical drawings -- Indication of
dimensions and tolerances -- Part 1: General principles. |
| ISO 406 1987 |
Technical drawings -- Tolerancing of
linear and angular dimensions. |
ISO 286-1 1988
ISO 286-2 1988 |
ISO system of limits and fits -- Part 1:
Bases of tolerances, deviations and fits.
ISO system of limits and fits -- Part 2: Tables of standard tolerance
grades and limit deviations for holes and shafts. |
| ISO 1101 1983 |
Geometrical Product Specifications (GPS)
-- Geometrical tolerancing -- Tolerances of form, orientation, location
and run-out. |
| ISO 1302 2002 |
Geometrical Product Specifications (GPS)
-- Indication of surface texture in technical product documentation. |
| ISO 1660 1987 |
Technical drawings -- Dimensioning and
tolerancing of profiles. |
| ISO 2692 1988 |
Technical drawings -- Geometrical
tolerancing -- Maximum material principle. |
| ISO 2692 1988/Amd1 1992 |
Technical drawings. Geometrical
tolerancing. Maximum material principle- Amendment 1: Least material
requirement. |
| ISO 5458 1998 |
Geometrical Product Specifications (GPS)
-- Geometrical tolerancing -- Positional tolerancing. |
| ISO 5459 1981 |
Technical drawings -- Geometrical
tolerancing -- Datums and datum-systems for geometrical tolerances. |
| ISO 8015 1985 |
Technical drawings -- Fundamental
tolerancing principle. |
| ISO 10578 1992 |
Technical drawings -- Tolerancing of
orientation and location -- Projected tolerance zone. |
| ISO 10579 1993 |
Technical drawings -- Dimensioning and
tolerancing -- Non-rigid parts. |
| ISO 14660-1 1999 |
Geometrical Product Specifications (GPS)
-- Geometrical features -- Part 1: General terms and definitions. |
| ISO 14660-2 1999 |
Geometrical Product Specifications (GPS)
-- Geometrical features -- Part 2: Extracted median line of a cylinder
and a cone, extracted median surface, local size of an extracted
feature. |
ISO/TS 17450-1 2005
ISO/TS 17450-2 2002 |
Geometrical product specifications (GPS)
-- General concepts -- Part 1: Model for geometrical specification and
verification.
Geometrical product specifications (GPS) -- General concepts -- Part 2:
Basic tenets, specifications, operators and uncertainties. |
| ISO/TR 16570 2004 |
Geometrical Product Specifications (GPS)
-- Linear and angular dimensioning and tolerancing: +/- limit
specifications -- Step dimensions, distances, angular sizes and radii. |
| ISO 16792 2006 |
Technical product documentation --
Digital product definition data practices. |
