Tolerancing Body in White Surface

This task shows you how to create geometrical tolerances on a body in white surface.
  1. Right-click the Hole positioning capture and select Unset Current form the contextual menu, right-click the Surface positioning capture and select Set Current form the contextual menu.

  2. Select the datum reference frame in the Semantic Tolerancing Advisor dialog box.

  3. Select the surface as shown on the part. 

     
    The Semantic Tolerancing Advisor dialog box is updated. Note the geometric feature type: One surface.
    The Propagation Selection options are displayed according to the type of face selected depending on the canonicity. In this scenario the options are not used. For more information, refer to Propagating Geometry Selection for Feature Creation.
  4. Click the Profile of a Surface icon:

    The Geometrical Tolerance dialog box appears.
  5. Set the numerical value to 0.5 mm.

  1. Select the Tolerance Zone tab and check the Shifted Profile Tolerance icon.

  2. Click the OK in the dialog box.

    The geometrical tolerance is created.
    The geometrical tolerance is created in the specification tree.
  3. Right-click the Surface positioning capture and select Unset Current form the contextual menu.