Cutting the Part by the Sketch Plane

This task shows how to make some edges visible. In other words, you are going to simplify the sketch plane view by hiding the portion of material you do not need for sketching.
Open the Intersection_Canonic.CATPart document.
  1. Select the plane on which you need to sketch a new profile and enter the Sketcher workbench.

    Once in the Sketcher, you obtain this view, which does not show the edges you want to see.

  1. Click Cut Part by Sketch Plane in the Visualization toolbar to hide the portion of part you do not want to see in the Sketcher.

    You obtain this view without the material existing above the sketch plane.

    The edges corresponding to the shell are now visible. The edges resulting from the intersection are not visualized and therefore cannot be selected.

You can now sketch the required profile taking these edges into account.