Creating Parallelograms

This task shows how to create a parallelogram by clicking. In this task, we will use the Sketch tools toolbar but, of course you can create this parallelogram manually. For this, move the cursor to activate SmartPick and click as soon as you get what you wish.
  1. Click Parallelogram .

 

The Sketch tools toolbar now displays values for defining the first point of the parallelogram.

 
  1. Type in the Sketcher tools toolbar for the first corner: H=20mm, V=20mm and press Enter.

 
 
 
  1. Type in the Sketcher tools toolbar for the second corner: H=37mm, V=10mm and press Enter.

 
 
 
  1. Type in the Sketcher Tools toolbar for the third point: H=57mm, V=10mm and press Enter.

 
 

The parallelogram and corresponding constraints appear as shown here.