This task consists of changing the parallelism constraint into an offset constraint.
The Change Type dialog box that appears, displaying all possible constraints.
|
|
Changing a constraint
means replacing the type of this constraint by another type. This operation
is possible depending on the supporting elements. You can select any
constraints, not necessarily in the active component. This task consists of changing the parallelism constraint into an offset constraint. |
||
|
|
Open the AssemblyConstraint05.CATProduct document. | ||
|
|
1. | Select the constraint to be changed. | |
|
|
|||
| 2. | Click the
Change Constraint icon:
The Change Type dialog box that appears, displaying all possible constraints. |
||
|
|
|||
| 3. | Select the new type of constraint. For our scenario, select Offset. | ||
| 4. | Click Apply to preview the constraint in the specification tree and the geometry. | ||
| 5. | Click OK to validate the operation. |
|
|
