|
CADAM Drafting Element/Property |
Interactive Drafting Element/Property |
Comments |
| Geometric
annotations: |
|
|
Arrow without text
|
Arrow |
The CADAM
arrow supports a series of end conditions. Not all of these end
conditions are supported by the current version of the Interactive
Drafting product. Therefore, end conditions will be transferred
to the best matching end condition. |
Breakout
|
Polyline |
|
Dot
|
Circle or
areafill |
If the CADAM
element is not filled, the element is transferred as a circle. If the
CADAM element is filled, it is transferred as an areafill. |
Raster
|
Not
transferred (*) |
|
Rectangle
|
Polyline or areafill |
If
the CADAM element is not filled, the element is transferred as a
polyline. If the CADAM element is filled, it is transferred as an
areafill. |
Section line
|
Polyline |
|
Triangle
|
Polyline or
areafill |
If the CADAM
element is not filled, the element is transferred as a polyline. If the
CADAM element is filled, it is transferred as an areafill. |
| Areafill
and pattern data: |
|
|
Areafill boundary
|
Polyline |
|
Areafill background color
|
Areafill color |
|
Areafill standard patterns
|
Areafill
pattern |
CADAM Drafting
areafill patterns are based on repeating lines or repeating cells.
The current Interactive Drafting product supports patterns based on
repeating lines only. The CADAM standard patterns based on
repeating lines (hatch, grid, steel, dashes, copper, rubber, aluminum
1, aluminum 2, titanium, plywood, plank, tile) are transferred to a
pattern simulating the CADAM pattern. CADAM standard patterns based on
repeating cells (brick, soil, hex, herring) are transferred as basic
hatch patterns. |
User defined areafill patterns
|
Areafill
pattern (simple hatch pattern) |
User defined
CADAM areafill patterns are transferred as simple areafill hatch
patterns. |