From a Previously Created Part

This task shows how to create a board from an existing part.
Open the Scenario1.CATProduct document.
It contains a part with two pads.

spectreeScen1NLS.gif (3404 bytes)

 Scenario1.gif (10419 bytes)

  1. Click Create Board I_Board.gif (404 bytes).
    The PartBody contains two pads, so you have to select the pad which will represent the board.

  2. Select Pad.1.
    CATIA recognizes the board and displays it in green.
    You can add holes, pockets and constraint areas, as well as technological properties

    spectreeScen1_2NLS.gif (3312 bytes)