.***************************************************************** .* * .* Copyright: IBM Corporation 1988 * .* All rights reserved. * .* * .* Security Classification: IBM INTERNAL USE ONLY * .* * .* Purpose: Master file for creation of Memo to users. * .* * .* Document/part number: None * .* * .* Product release level: Not Applicable * .* * .* Minimum BookMaster release level required: 2.0 * .* * .* Required style: Memonum Style * .* * .* Imbedded Script files: None * .* * .* Included page segments: None * .* * .* Notes: Use only BookMaster tags, reference Corporate * .* Standard 0-0145-021 and BookMaster User's Guide * .* The "memonum" is supplied by SPC or ISMD, leave * .* it blank. * .* * .* * .* Change status: 1.st version, sublevel 1, July 1989 * .* * .***************************************************************** .* .* Publications, you might find useful, during the work. .* .* SC34-5009 BookMaster, Users Guide. .* .* SC24-5220 System Product Editor, User's Guide (XEDIT) .* .* C-S 0-0145-021 Corporate Standard: .* Document Interchange for Customer and Service Information .* .***************************************************************** :userdoc. :prolog. .*********************************************************************** .* BOOKMASTER SKELETON FILE FOR CREATING A MEMO TO USERS .*********************************************************************** .* .* AUTHOR: Insert Program Number between the single quotes: .* .nameit symbol=progno text='5601-257'. .*********************************************************************** .* .* AUTHOR: Do you have Feature Codes to add, replace the xxx with YES .* between the single quotes, this controls the appearance of the .* text Features under subject. .* .nameit text='true' symbol='xxx' .* .* AUTHOR: Insert Feature Codes between the single quotes: .* .nameit symbol=feat text='????/????/????'. .*********************************************************************** .* .* AUTHOR: Insert Program Name between the single quotes .* .nameit symbol=progname text='AIXwindows Environment/6000' .* .*********************************************************************** .* .* AUTHOR: Insert Operating System under which the program is installed .* .nameit symbol=sysname text='AIX'. .*********************************************************************** .* .* AUTHOR: Insert Release Number between the single quotes: .* .nameit symbol=release text='01'. .*********************************************************************** .* .* AUTHOR: Insert Modification Level Number between the single quotes .* .nameit symbol=modifica text='01'. .*********************************************************************** .* .* AUTHOR: Next you have to choose which memo you want to make. .* You can choose between: .* .* 1 MEMO TO NEW LICENSEES (with enclosed program directory) .* 2 MEMO TO NEW LICENSEES (with no program directory enclosed) .* 3 MEMO TO CURRENT LICENSEES .* 4 PTF MEMO (without MRM) .* 5 PTF MEMO (with MRM) .* 6 BLANK FORM (you add all the text yourself) .* 7 READ THIS FIRST (you add all the text yourself) .* .* You just replace "n" in symbol='n' with the number "1,2,3 .* 4,5,6 or 7 .* .nameit text='true' symbol='7' .* .* AUTHOR: If you make a memo 6, you have to scroll back and add the .* addressee before the Program Name between the single quotes .* as follows: .* .* .nameit symbol=progname text='Current Licensee of .* program name' .* .*********************************************************************** .* .* AUTHOR: Specify which Distribution Center - SPC or ISMD - that is the .* current Primary Program Library - Do it by replacing SPC with .* ISMD between the two single quotes in the following line if .* needed. 'SPC' or 'ISMD' must be written in upper case .* .nameit symbol=DISTLIB text='ISMD' .* .* Do not change the following line .* .nameit text='true' symbol=&DISTLIB. .* .*********************************************************************** .* .* AUTHOR: For ISMD use only: Set the R&A Coordinator ID Code between the .* two single quotes .* .nameit symbol=racoord text='????' .* .*********************************************************************** .* .* AUTHOR: If you make a Memo To Current Licensees (3), you can add .* from 1 to 5 different Attachments: .* .* "att1" Summary of changes .* "att2" List of Program Material .* "att3" Statement of Program Support .* "att4" Ordering Information for Basic Material .* "att5" Ordering Information for Optional Material .* .* Replace the xxxx in the following symbols with .* att1, att2, and so on according to the number of .* attachments you will be adding. .* .* Do not change the symbols you will not be using. .* That is, leave them with xxxx. .* .nameit text='true' symbol='xxxx' .nameit text='true' symbol='xxxx' .nameit text='true' symbol='xxxx' .nameit text='true' symbol='xxxx' .nameit text='true' symbol='xxxx' .* .* Search for "Attachment att1" "Attachment att2" and so on .* later in this file to find where to place the text of .* your attachments. .* .*********************************************************************** .* .* AUTHOR: If you want to make a PTF Memo 4, scroll through the .* document until you reach the text: .* .* Add the PTF Sequence Number for Memo 4 .* .*********************************************************************** .* .* AUTHOR: If you want to make a PTF Memo 5, scroll through the .* document until you reach the text: .* .* Add the PTF and MRM Label Numbers for Memo 5 .* .*********************************************************************** .* .* AUTHOR: If you want to make a Memo 6 (you add the text yourself) .* scroll until you reach the text: .* .* Memo 6, Here you add your own text .* .*********************************************************************** .* .* AUTHOR: If you want to make a Memo 7 (READ THIS FIRST) .* scroll until you reach the text: .* .* Memo 7, Here you add your own text .* .*********************************************************************** .* .* AUTHOR: If you want to add some text to any of the standard memos .* scroll until you reach the text: .* .* Here you add the Additional Text .* .*********************************************************************** .* .* NOTE: Do not change anything from here to: .* .* Add the PTF Sequence Number for Memo 4 .* .*********************************************************************** .nameit symbol=memonum text='' :docprof style=memonum punct='' language=english. :revision id=first char='|' run=yes. :eprolog. :frontm. .* :body. :griddef id=header rules=none hunits='* * *'. .************************* Logo :grid refid=header. :gridseg. :gridarea. :artwork &ibml36. :gridarea.&rbl. .************************* Address SPC/ISMD :gridarea. .************************* Address SPC .config addre1 on .when 'SPC' insert :lines. Software & Publications Center Sortemosevej 21 DK-3450 Alleroed Denmark :elines. .config addre1 off .************************* Address ISMD .config addre2 on .when 'ISMD' insert :lines. :elines. .config addre2 off :egrid. .************************* Rule :artwork rule depth=medium. .************************* Set up Memorandum to/Subject .*.config memo7 on .*.when '7' delete :artwork depth=5. .getw symbol=memoto gmltype='hp2' text='Memorandum to: MM' :dl tsize=&memoto. :dt.Memorandum to: .************************* Title :dd. .config type1 on .when 'SPC' insert .************************* SPC, Memo 1 2, New Licensees of .config navn1 on .when '1 or 2' insert New Licensees of .config navn1 off .************************* SPC, Memo 3, Current Licensees of .config navn3 on .when '3' insert Current Licensees of .config navn3 off .************************* SPC, Memo 4 5, Licensees of .config navn45 on .when '4 or 5' insert Licensees of .config navn45 off .config type1 off .************************* ISMD, Memo 1 2 3 4 5, Licensees of .config type2 on .when 'ISMD' insert .config navn12345 on .when '1 or 2 or 3 or 4 or 5 or 7' insert Licensees of .config navn12345 off .config type2 off .************************* SPC/ISMD, Program name, Program number &progname. .*(&sysname.) .br;Program Number &progno. .************************* SPC/ISMD, Subject, Release, Modification Level :dt.Subject: :dd.Release &release., Modification Level &modifica. .************************* Features, yes or no .config feattea on .when '???' insert .config feattea off .config featteb on .when 'YES' insert .************************* Features text for memo 1, 2, 3, 6, 7 .config featte1 on .when '1 or 2 or 3 or 6 or 7' insert .br;Features &feat. .config featte1 off .************************* Features text for memo 4, 5 .config featte2 on .when '4 or 5' insert .br;PTF(s) for Features &feat. .config featte2 off .config featteb off :edl. .*:p.&rbl. .*:p.&rbl. .*.config memo7 off .************************* Main text of Memorandums starts here .************************* MEMO 1 .config memo01 on .when '1' insert :p.Thank you for your order. The Material you have received is listed on the enclosed Packing List. Please review the Packing List to ensure you have received all items listed. :p. .config center1 on .when 'SPC' insert :p.If there are any discrepancies between the package contents and the Packing List, please report these via the Software Delivery Report which is enclosed for your convenience. .config center1 off .config center2 on .when 'ISMD' insert :p.If there are any discrepancies between the package contents and the Packing List, please report these via the Software Distribution Questionnaire which is enclosed for your convenience. .config center2 off :p. :p.For further description of all available material, see the enclosed Program Directory. :p. .config memo01 off .************************* MEMO 2 .config memo02 on .when '2' insert :p.Thank you for your order. The Material you have received is listed on the enclosed Packing List. Please review the Packing List to ensure you have received all items listed. :p. .config center1 on .when 'SPC' insert :p.If there are any discrepancies between the package contents and the Packing List, please report these via the Software Delivery Report which is enclosed for your convenience. .config center1 off .config center2 on .when 'ISMD' insert :p.If there are any discrepancies between the package contents and the Packing List, please report these via the Software Distribution Questionnaire which is enclosed for your convenience. .config center2 off :p. .config memo02 off .************************* MEMO 3 .config memo03 on .when '3' insert :p.The material you have received is listed on the enclosed Packing List. Please review the Packing List to ensure you have received all items listed. :p. .config center1 on .when 'SPC' insert :p.If there are any discrepancies between the package contents and the Packing List, please report these via the Software Delivery Report which is enclosed for your convenience. .config center1 off .config center2 on .when 'ISMD' insert :p.If there are any discrepancies between the package contents and the Packing List, please report these via the Software Distribution Questionnaire which is enclosed for your convenience. .config center2 off :p. :p.Attached to this memorandum: .tabrack 'ul----Ordering Information for Optional Material. ' :ul. .config attac1 on .when 'att1' insert :li.Summary of Changes .config attac1 off .config attac2 on .when 'att2' insert :li.List of Program Material .config attac2 off .config attac3 on .when 'att3' insert :li.Statement of Program Support .config attac3 off .config attac4 on .when 'att4' insert :li.Ordering Information for Basic Material .config attac4 off .config attac5 on .when 'att5' insert :li.Ordering Information for Optional Material .config attac5 off :eul. :p. :p.Please refer to the attachment(s) for further description. .config memo03 off .************************* MEMO 4 .config memo04 on .when '4' insert :p.The material you have received is listed on the enclosed Packing List. Please review the Packing List to ensure you have received all items listed. :p. .config center1 on .when 'SPC' insert :p.If there are any discrepancies between the package contents and the Packing List, please report these via the Software Delivery Report which is enclosed for your convenience. .config center1 off .config center2 on .when 'ISMD' insert :p.If there are any discrepancies between the package contents and the Packing List, please report these via the Software Distribution Questionnaire which is enclosed for your convenience. .config center2 off :p. :p.The following is the only PTF(s) that is/are currently valid. It/they is/are enclosed with this memorandum. :p. :hp2.PTF No::ehp2. :ul. .************************************************************************ .************************************************************************ .* .* AUTHOR: Add the PTF Sequence Number for Memo 4 - .* after the first :li. .* :li. .* .* If you have more PTF Sequence Numbers, enter each one .* after a :li. and remove the .*** .* .***:li. .***:li. .***:li. .***:li. .************************************************************************ .*********************************************************************** .* .* NOTE: Do not change anything from here to: .* .* Add the PTF Sequence Number/MRM Label for Memo 5 .* .*********************************************************************** :eul. :p.This PTF is subject to the provisions of the Agreement for IBM Licensed Programs. By this Agreement, the customer has agreed not to provide or otherwise make available the PTF to any person other than the customer or IBM employees. :p. :p.If the customer wishes to dispose of the licensed PTF(s), which remains the property of IBM, the customer should destroy the PTF(s) and certify the destruction thereof to IBM in writing. :p. :p.The PTF may not be given to third parties, except during the period any such person is on the customer's premises with the customer's permission for the purposes specifically related to the customer's use of the PTF. :p. .config memo04 off .************************* MEMO 5 .config memo05 on .when '5' insert :p.The material you have received is listed on the enclosed Packing List. Please review the Packing List to ensure you have received all items listed. :p. .config center1 on .when 'SPC' insert :p.If there are any discrepancies between the package contents and the Packing List, please report these via the Software Delivery Report which is enclosed for your convenience. .config center1 off .config center2 on .when 'ISMD' insert :p.If there are any discrepancies between the package contents and the Packing List, please report these via the Software Distribution Questionnaire which is enclosed for your convenience. .config center2 off :p. :p.The enclosed Machine Readable Materials contain the only PTF(s) that is/are currently valid. The MRM label(s) show the following PTF sequence number(s). :p. .*text ptf mrm label :dl tsize=15 termhi=0. :dthd.PTF :ddhd.MRM Label .************************************************************************ .* .* AUTHOR: Add the PTF Sequence Number/MRM Label for Memo 5 .* Place the PTF Sequence Number after the first ":dt." .* below and the MRM Label after the first ":dd.". .* .* If you have more than one set - remove the ".***" and add .* the next set after the following ":dt./:dd." :dt. :dd. .***:dt. .***:dd. .***:dt. .***:dd. .***:dt. .***:dd. .************************************************************************ .*********************************************************************** .* .* NOTE: Do not change anything from here to: .* .* Memo 6, - Here you add your own text .* .*********************************************************************** :edl. :p. :p.This Program Temporary Fix (PTF) is subject to the provisions of the Agreement for IBM Licensed Programs. By this Agreement, the customer has agreed not to provide or otherwise make available the PTF(s) to any person other than customer or IBM employees. :p.If the customer wishes to dispose of the licensed PTF(s), which remains the property of IBM, the customer should destroy the PTF(s) and certify the destruction thereof to IBM in writing. :p.The PTF may not be given to third parties, except during the period any such person is on the customer's premises with the customer's permission for the purposes specifically related to the customer's use of the PTF. :p. .config memo05 off .************************* MEMO 6 .config memo06 on .when '6' insert .************************************************************************ .* .* AUTHOR: Memo 6, - Here you add your own text .* .* Enter your text after the ":p." below. .* If you want to activate another Paragraph, remove ".***" .* before the next ":p." and add your text. .* :p. .***:p. .***:p. .***:p. .***:p. .*---------------------------------------------------------------------* .config memo06 off .************************* MEMO 7 .config memo07 on .when '7' insert .*****Space for Artwork :artwork depth=30mm. :table cols='*' width=page rules=none align=center frame=none scale='3.6'. :row. :c. :etable. :artwork depth=80mm. .************************************************************************ .* .* AUTHOR: Memo 7, - Here you add your own text .* .* .*****Space for Artwork :artwork depth=20mm. :table cols='*' width=page rules=none align=right frame=none scale='1.0'. :row. :c.P/N 31F4235 :etable. .pa .pa .*****Space for Artwork :artwork depth=18mm. :table cols='*' width=page rules=none align=left frame=none scale='1.8'. :row. :c.ABOUT THIS MEMO :etable. :p.The information in this memo consists of hints for using the system, help with functions that the new user may find difficult, and last minute updates to the existing documentation. :p.This memo contains the information that is included in the file /usr/lpp/X11/README, plus some updates which did not make it into that file. Items that are different from /usr/lpp/X11/README are marked with :q.|:eq. in the left margin. :p.Users should also refer to other README files which are installed with the software. For information on locating those files, see :hdref refid=rdme. in this document. .*****Space for Artwork :toc. :body. :h2.Notes on Installation and Update :h3.Installing with AIXwindows Environment/6000 For users of IBM AIXwindows Environment/6000, application of the AIX 3003 update must be done in two steps: 1. Apply AIXwindows update (X11rte) using installp. 2. Apply AIX base operating system update using utdatep. (This update is included as part of the Multi Program Product (MPP) update medium; any other desired updates in the MPP should also be applied at this time.) The updated AIXwindows WILL NOT be useable until the AIX base operating system has also been updated. If the AIX 3003 update of the AIX base operating system is subsequently rejected, AIXwindows will not be useable until the previous level of X11rte is reinstalled. X11RTE licensed program is a prerequisite for installation of the X11DEV licensed program. The X Server cannot be running while you install PCSIM because PCSIM re-links the X Server to pick up the PCSIM Server extensions. :h3.Installing the AIX Personal graPHIGS/6000 Users of graPHIGS Version 2 Release 1 should be aware that applying the AIX update 3003 or 3003KJ of the base operating system and AIXWindows requires that graPHIGS be updated to Version 2 Release 2. Currently the Model 730 supports only one 3D process. A graPHIGS application using the private connection to a graPHIGS nucleus or a graPHIGS remote nucleus is considered a 3D process. Such a process CAN open multiple windows. A second process will not run. The following programs are prerequisites for the graPHIGS API: :ol compact. :li.libX11.a :li.libXext.a :li.libgai.a :eol. :h4.Selecting Environments If you do an installp -l a list of the AIX Personal graPHIGS /6000 environments will be displayed. You can choose which ones you want to install: :dl compact tsize=1i. :dt.graPHIGS.R :dd.Run time support ( includes C and Pascal header files ) NOTE: This option is required by all other options. :dt.graPHIGS.1 :dd.IBM Plotter Support :dt.graPHIGS.1C :dd.Calcomp Plotter Support &endash. requires IBM Plotter support :dt.graPHIGS.1V :dd.Versatec Plotter Support &endash. requires IBM Plotter support :dt.graPHIGS.2 :dd.Japanese Fonts :dt.graPHIGS.3 :dd.GKS-CO Run time support :dt.graPHIGS.4 :dd.graPHIGS Remote Nucleus :edl. :h2 id=rdme.README Files :p.Many of the separately installable programs have their own README files. Look for those files in the /usr/lpp/ directories. A list of them may be obtained with this command: :xmp. ls /usr/lpp/*/*README* :exmp. :h2.Mouse button functionality with Motif window manager in AIXwindows The default Motif configuration file (/usr/lib/X11/system.mwmrc) sets up actions (e.g. raise, move, ...) to occur upon receipt of button presses for only three states: :ol. :li.When no modifier keys (e.g. shift, Num_Lock, ...) are pressed. :li.When the shift key is pressed. :li.When the meta (alt) key is pressed. :eol. If the user wants Motif to perform the same action for a button- press regardless of whether the Num_Lock key is pressed, it is is necessary to add this modifier combination to the system-wide /usr/lib/X11/system.mwmrc (or the user's private $HOME/.mwmrc) Motif configuration file. :rev refid=first. :h2.Hot Keying in AIXwindows Rapid multiple hot keying may cause AIXwindows server to die. :h2.Backing Store in AIXwindows X clients that set the window backing_store hint to "Always" (i.e. XWindowAttributes.backing_store=Always) will not get any expose events. This means that if you run the server without backing store (which is the default), the X client will not get backing store support nor will it get expose events. The solution is to either not set the backing_store hint to "Always" or to start the server with backing store (i.e. xinit -bs). .***:p. .***:p. .***:p. .*---------------------------------------------------------------------* .config memo07 off .*********************************************************************** .* .* AUTHOR: Here you add the Additional Text - to Memo 1,2,3,4,5 or 6 .* .* The text will appear just after the last paragraph, .* containing the last of the standard text. .* Just remove the ".***" in the following line and add .* your text after the ":p.". .* .***:p. .*---------------------------------------------------------------------* .config attach on .when '3' insert .***** .config atta1 on .when 'att1' insert :h1.Summary of changes .************************************************************************ .* .* AUTHOR: Attachment att1 .* .* Enter your text after the ":p." below. .* If you want to activate another paragraph, remove the .* ".***" before the :p. and add your text. .* :p. .***:p. .***:p. .***:p. .***:p. .* End attachment att1 here .*---------------------------------------------------------------------* .config atta1 off .* .config atta2 on .when 'att2' insert :h1.List of Program Material .************************************************************************ .* .* AUTHOR: Attachment att2 .* .* Enter your text after the ":p." below. .* If you want to activate another paragraph, remove the .* ".***" before the :p. and add your text. .* :p. .***:p. .***:p. .***:p. .***:p. .* End attachment att2 here .*---------------------------------------------------------------------* .config atta2 off .config atta3 on .when 'att3' insert :h1.Statement of Program Support .************************************************************************ .* .* AUTHOR: Attachment att3 .* .* Enter your text after the ":p." below. .* If you want to activate another paragraph, remove the .* ".***" before the :p. and add your text. .* :p. .***:p. .***:p. .***:p. .***:p. .* End attachment att3 here .*---------------------------------------------------------------------* .config atta3 off .config atta4 on .when 'att4' insert :h1.Ordering Information for Basic Material .************************************************************************ .* .* AUTHOR: Attachment att4 .* .* Enter your text after the ":p." below. .* If you want to activate another paragraph, remove the .* ".***" before the :p. and add your text. .* :p. .***:p. .***:p. .***:p. .***:p. .* End attachment att4 here .*---------------------------------------------------------------------* .config atta4 off .config atta5 on .when 'att5' insert :h1.Ordering Information for Optional Material .************************************************************************ .* .* AUTHOR: Attachment att5 .* .* Enter your text after the ":p." below. .* If you want to activate another paragraph, remove the .* ".***" before the :p. and add your text. .* :p. .***:p. .***:p. .***:p. .***:p. .* End attachment att5 here .*---------------------------------------------------------------------* .config atta5 off .config attach off .************************************************************************