09/26/96,
 
  3.2 Support For LIM 4.0
 
 
 
  SPECIAL NOTICES
 
       Information in this document is correct to the best of our
       knowledge at the time of this writing.  Please send feedback
       by fax to "AIXServ Information" at (512) 823-4009.
 
       Please use this information with care.  IBM will not be
       responsible for damages of any kind resulting from its use.
       The use of this information is the sole responsibility of
       the customer and depends on the customer's ability to eval-
       uate and integrate this information into the customer's
       operational environment.
 
  ABOUT THIS DOCUMENT
 
       3.2 Support for LIM 4.0
 
  PROCEDURE
 
       A LIM 4.0 driver called PCSIMLIM.SYS is supplied with the
       pcsim LPP.  This LIM driver is for use with pcsim to access
       extra memory.  The driver can be found in the samples direc-
       tory of pcsim.
 
       To use Expanded Memory do the following:
 
       1.  Copy the driver shipped with the simulator
 
           /usr/lpp/pcsim/samples/PCSIMLIM.SYS
 
           into your DOS file system.  For example:
 
           doswrite -D/dos3.3 /usr/lpp/pcsim/samples/PCSIMLIM.SYS PCSIMLIM.SYS
 
           OR
           __
 
           cp /usr/lpp/pcsim/samples/PCSIMLIM.SYS /dos3.3
 
           depending on whether /dos3.3 is a file or directory.
 
       2.  Invoke the Simulator with 'pcsim -xmem 4096 -save' to
           request 4MB of extended memory (or however much you
           need) and save it in your profile (simprof).  The param-
           eter 4096 is the size of extended memory in 1KB units.
 
       3.  Add to your \CONFIG.SYS file the following line:
 
           device=c:\pcsimlim.sys FRAME=D000 /X:256
 
           The parameter 256 is the number of "frames" each of
           16Kb.
 
       4.  Reboot (Ctrl-Alt-Del) or restart the Simulator.
 
 
 
 
                                              3.2 Support For LIM 4.0  1
 
 
                                                               09/26/96,
 
  READER'S COMMENTS
 
  Please fax this form to (512) 823-4009, attention "AIXServ Informa-
  tion".  You may also e-mail comments to: elizabet@austin.ibm.com.
  These comments should include the same customer information requested
  below.
 
  Use this form to tell us what you think about this document.  If you
  have found errors in it, or if you want to express your opinion about
  it (such as organization, subject matter, appearance) or make sug-
  gestions for improvement, this is the form to use.
 
  If you need technical assistance, contact your local branch office,
  point of sale, or 1-800-CALL-AIX (for information about support offer-
  ings).  These services may be billable.  Faxes on a variety of sub-
  jects may be ordered free of charge from 1-800-IBM-4FAX.  Outside the
  U.S. call 415-855-4329 using a fax machine phone.
 
  When you send comments to IBM, you grant IBM a nonexclusive right to
  use or distribute your comments in any way it believes appropriate
  without incurring any obligation to you.
 
  NOTE:  If you have a problem report or item number, supplying that
  number may help us determine why a procedure did or did not work in
  your specific situation.
 
  Problem Report or Item #:               Branch Office or Customer #:
 
  Be sure to print your name and fax number below if you would like a
  reply:
  Name:                                           Fax Number:
 
  ______________________________________________________________________
 
  ______________________________________________________________________
 
  ______________________________________________________________________
 
  ______________________________________________________________________
 
  ______________________________________________________________________
 
  ______________________________________________________________________
 
  ______________________________________________________________________
 
  ______________________________________________________________________
 
  ______________________________________________________________________
 
  ______________________________________________________________________
 
  ______________________________________________________________________
 
  ______________________________________________________________________
 
  END OF DOCUMENT (lim.4.0.memory.cmd)
 
 
 
                                              3.2 Support For LIM 4.0  2