10/11/95 TTY HOG Error SPECIAL NOTICES Information in this document is correct to the best of our knowledge at the time of this writing. Please send feedback by fax to "AIXServ Information" at (512) 823-4009. Please use this information with care. IBM will not be responsible for damages of any kind resulting from its use. The use of this information is the sole responsibility of the customer and depends on the customer's ability to eval- uate and integrate this information into the customer's operational environment. TTY HOG ERROR MESSAGE: "TTY TTYHOG" DESCRIPTION: TTYHOG Overrun -- The sending device is ignoring flow control. This error occurs after the hardware FIFO has been accessed and has written to the software buffer. In other words the tty hog error is logged because the buffer where incoming characters are placed is over- flowing. When the buffer is about 3/4's full, the device driver notifies the hardware to ( in this case tty ) send the XOFF char to the sender to stop sending data. If the sender continues to send data AND the buffer is not emptied, the device driver flushes the buffer and logs the error message in the error log. THINGS TO CHECK o Check cabling -- cables without proper shielding can cause problems; cables without proper pinouts can cause problems. o Check flow control of device (xon/xoff, rts/cts). Keep in mind that hardware handshaking requires correct cabling, pinouts, and rts on the device stack (e.g., "stty add rts < /dev/tty0"). TTY HOG Error 1 10/11/95 READER'S COMMENTS Please fax this form to (512) 823-4009, attention "AIXServ Informa- tion". You may also e-mail comments to: elizabet@austin.ibm.com. These comments should include the same customer information requested below. Use this form to tell us what you think about this document. If you have found errors in it, or if you want to express your opinion about it (such as organization, subject matter, appearance) or make sug- gestions for improvement, this is the form to use. If you need technical assistance, contact your local branch office, point of sale, or 1-800-CALL-AIX (for information about support offer- ings). These services may be billable. Faxes on a variety of sub- jects may be ordered free of charge from 1-800-IBM-4FAX. Outside the U.S. call 415-855-4329 using a fax machine phone. When you send comments to IBM, you grant IBM a nonexclusive right to use or distribute your comments in any way it believes appropriate without incurring any obligation to you. NOTE: If you have a problem report or item number, supplying that number may help us determine why a procedure did or did not work in your specific situation. Problem Report or Item #: Branch Office or Customer #: Be sure to print your name and fax number below if you would like a reply: Name: Fax Number: ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ 081192DAYALA END OF DOCUMENT (hog.zap, 4FAX# 2444) TTY HOG Error 2